Imported abrasive belt from Germany, suitable for grinding high alloy steel, metal parts, titanium alloy and stainless steel. Has a good cutting force for polishing ultra-hard materials.

 Classification of abrasive belts

1. Silicon Carbide Abrasive: It can be recognized by black sand surface. This product is especially suitable for sanding plastics, paints, rubber and wood products and grinding titanium alloys and certain cast irons.

2.alumina abrasive: can be recognized by the red sand surface, polishing material alumina abrasive is widely used in wood and metal plus field.

abrasive belt，polishing belt，Silicon Carbide Abrasive，abrasive belt products，abrasive belt supplier，sanding belt process

3. Gray-white abrasive: The surface has a layer of stearic acid coating to prevent or slow down the blockage. This product is especially suitable for the polishing of unpainted, plastic, titanium and titanium alloys. A special product is required for economic processing of stainless steel. This product with an active grinding layer to reduce heat build-up and abrasive wear; the color of the sand surface is light red or light blue.

4.anti-static abrasive belt products: sand surface is black, suitable for wood processing. It reduces static build-up and reduces the stickiness of dust to the abrasive belts of machines, tools and polishing materials.

5. Stacked abrasive belt: It is a special product, and its abrasive grain is a kind of abrasive mass, which forms the regulation effect of multi-layer abrasive on the sand surface. As the abrasive particles wear out, the sand surface remains sharp, extending life and maintaining consistent resection and finish.

abrasive belt，polishing belt，Silicon Carbide Abrasive，abrasive belt products，abrasive belt supplier，sanding belt process

6. Ceramic abrasive series products: It is especially suitable for grinding high alloy steel, titanium alloy and nickel base alloy. Due to their high hardness, they are also used to polish superhard materials. For the grinding of stainless steel and heat-resistant steel, we recommend the use of super-coated products, this third coating with self-lubricating effect can greatly increase the removal rate and reduce the temperature of the grinding point. Ceramic abrasives are widely used in grinding turbines, various tools, metal coils and plates, round pipe, tanks, sanitary fittings, castings, medical equipment, etc.

welcome to visit our website:http://www.sandersabrasives.com/